Table of Contents
Advertisement
Interference in TV
• Check components for shielding, move away from monitor if necessary.
The touch panel does not respond
• Check the input signal setting.
• Make sure the USB cable is connected properly.
• When using touch function at the display edge, there may be a slight gap between touch
position on the screen and where you touched. It is the specification and not a failure of
product.
The response of the touch screen is not correct
• Avoid direct sunlight or strong light on the screen.
• If there are some obstacles near the touch screen, it may malfunction.
• Wipe gently with a soft cloth.
The computer's power management does not work
• It is recommended to choose "S3" at the "Power Management" item in the BIOS (abbreviation
of Basic Input / Output System) computer's setup screen.
Either faint vertical or horizontal stripes may appear, depending on the specific display pattern.
This is no product fault or degradation.
Troubleshooting | 37
Advertisement
Table of Contents
