Table of Contents
Advertisement
- Error symbol on the display.
Note:
If press
RESET
button(1), the unit can't
work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the
disc socket.
Radio Operation
Selecting The Frequency Band
Press
BAND
button (14) shortly to select
the desired band. The reception band will
change between FM and AM.
Stereo/Mono
Press
ST
(15) or
MO/ST
control to select mono/stereo mode.
Local/Distant
Press
ST LOC
(15) for several seconds
or
LO/DX
on the remote control
between local and distant stations.
LOCAL setting for reception of strong
signal station, and DISTANT setting for
reception of weaker signal stations.
Selecting Station
- Press preset
1-6
station which had been stored in the
memory.
- Press
for several seconds until
"
MANUAL appears on the display, and
"
then press
button to select a station.
If both buttons have not been pressed for
several seconds, they will return to
automatic seek mode .
Automatic Memory Storing & Program
Scanning
- Automatic memory storing
Press
AS/PS
button (17) for several
seconds, the radio searches from the
current frequency and checks the signal
strength until one cycle search is
finished. And then 6 strongest stations
are stored into the corresponding preset
number button.
- Program scanning
Press
AS/PS
button (17) shortly to scan
preset station. When the field strength
level is more than the threshold level of
9
on the remote
to select
button (16) to select a
stop level, the radio is holding at that
preset number for several seconds with
release mute, and then searches again.
Station Storing
- Press
button to activate automatic
seek mode.
- In manual mode, press
select a station
.
Press preset
1-6
button (16) for several
seconds to store current station into the
number button.
CD/MP3 Operation
Playback
1.
Gently insert a disc with the label side
facing up; the disc will be pulled into the
unit automatically. The disc playback
begins.
2.
For CD:
3 . For MP3
1).
Press
button to move between
work area A, B and C.
2).
Press
button to select the
desired folder or file of this work area.
3).
Press
ENTER
the selected item.
button to
button (30) to confirm
Advertisement
Table of Contents
