Radio Operation - Pyle PLPK65TVD Owner's Manual

OPERATION
Smart navigation in MP3 Play
MP3 disc is playing as the format of
FOLDER.
For example:
SMART NAVI
ROOT ROOT
CD01
CD02
CD03
CD04
CD05
PLAY MODE
In stop mode, use
remote control to select the item or folder
(such as CD01, CD02...) and press
ENTER button on the remote control to
confirm, then select the desired track
(such as 001 PLUMT, 002 RZID...) on the
current folder to play.
Pressing REPEAT button repeatedly can
select three kinds of repeat play mode.
REP-ONE:
Play the same song over and again.
FOLDER REP:
Play all songs in the current directory in
sequence, over and again.
FOLDER:
Play all songs in the current directory
once.
When select PLAY MODE, press
change between the following mode:
SINGLE REP-ONE
DISC SCAN DISC
SHUFFLE ON PROGRAM PXXX
During the playback, use
skip an item ahead or back.
: Rapid reverse,
Note: The FOLDER cannot be selected
during playing. It can be selected after
(STOP) button pressed.
MP3 001 PLUMT
MP3 002 RZID
MP3 003 ASCIS
MP3 004 DCYI
MP3 005 BFZ
DISC
/ , / on the
/
FOLDER FOLDER REP
DISC REP RANDOM
or
: Rapid advance

RADIO OPERATION

• Switching to radio mode
Press MODE button on remote control
to select radio mode.
In radio mode, the following
information will appear on the display.
VOLUME
BASS
TREBLE
BALANCE
FADER
LOUD
EQ
• Selecting the frequency band
Press BAND on remote control to
select desired band. The reception
band will change in the following order:
FM1
• Selecting station
During radio mode, press CH
on remote control to increase
frequency or CH
control to decrease frequency by one
step of channel spacing. Hold the
button longer for fast tuning. The
frequency is updated correspondingly
on display.
• Setting memory
to
Press RADIO PRESET buttons (1~6)
on remote control to preset stations at
radio mode. With this system, a total
of 30 stations can be stored in the
memory of six buttons. Each band
stores up to six preset stations.
to
The stations might be FM1, FM2,
FM3, AM1 and AM2 band. The
operation is as below:
- Store in Memory
Press and hold desired memory
20
FM1 98.1 MHz
MONO
40 M1
-2 M2
-2 M3
L-R M4 106.10
R-F M5 108.00
ON M6
POP
FM2 FM3 AM1
AM2
button on remote
87.50
90.10
98.10
87.50
button