Table Of Contents; Introduction; Product Description; Intended Use - Jonsered LM 2146 CMD Operator's Manual

Introduction..................................................................... 6
Safety..............................................................................7
Safety instructions for maintenance..............................10
Assembly...................................................................... 10
Operation...................................................................... 10

Product description

The product is a pedestrian-controlled rotary lawn
mower. The grass is collected in a grass catcher.
Remove the grass catcher to get rear discharge of the
grass. Attach a mulch kit to cut the grass into fertilizer.

Product overview

(Fig. 1 )
1. Drive bail
2. Handle / handlebar
3. Engine brake handle
4. Electrical starter button (LM 2146 CMDAE)
5. Starter rope handle
6. Loop for starter rope
7. Lower handle
8. Grass catcher
9. Handle height adjustment
10. Fuel tank
11. Cutting height control
12. Muffler
13. Cutting deck
14. Primer bulb
15. Spark plug
16. Air filter
17. Water connector
18. Oil cap
19. Blade
20. Spring washer
21. Blade bolt
22. Battery charger (LM 2146 CMDAE)
23. Battery (LM 2146 CMDAE)
24. Operator's manual

Symbols on the product

WARNING: Careless or incorrect use can
result in injury or death to the operator or
(Fig. 2 ) bystanders.
Please read the operator's manual carefully
and make sure that you understand the
(Fig. 3 ) instructions before use.
6
Contents
Maintenance................................................................. 11
Transportation, storage and disposal........................... 14
Technical data.............................................................. 15
EC Declaration of Conformity....................................... 16

Introduction

Intended use

Use the product to cut grass in private gardens. Do not
use the product for other tasks.
(Fig. 4 )
(Fig. 5 )
(Fig. 6 )
(Fig. 7 )
(Fig. 8 )
(Fig. 9 )
(Fig. 10 )
(Fig. 11 )
(Fig. 12 )
(Fig. 13 )
(Fig. 14 )
(Fig. 15 )
(Fig. 16 )
(Fig. 17 )
(Fig. 18 )
(Fig. 19 )
(Fig. 20 )
Keep persons and animals at a safe
distance from the work area.
Stop the engine and remove the ignition
cable before repairs or maintenance.
Look out for thrown objects and ricochets.
Warning: rotating blade. Keep hands and
feet clear.
Warning: rotating parts. Keep hands and
feet clear.
This product is in accordance with
applicable EC directives
Noise emission to the environment
according to the European Community's
Directive. The product's emission is
specified in the Technical data chapter and
on the label.
Risk of fire.
Risk of fire.
Risk of explosion.
Always stop the engine before refueling.
Hot surface.
Clutch
Drive bail disengaged
Drive bail engaged
Forward drive
Engine
349 - 003 - 24.10.2017