Voice Answer - Kyocera E1000 User Manual

Voice Answer

You can set your phone to answer a call
automatically when using a hands-free.
Enable voice answer
Select > >
jÉåì pÉííáåÖë sçáÅÉ=cÉ~íìêÉë
and one of the following:
sçáÅÉ=^åëïÉê
√ Disabled turns voice answer off.
√
allows you to answer a call
táíÜ=~ÅÅÉëëçêó
with an accessory.
To use the voice answer feature, you must Auto-
Answer feature (see "Auto Answer" on page 72)
disabled and the phone set to normal sounds (see
"Ringer Mode" on page 46).
Use voice answer
When you receive an incoming call, the phone
prompts "Incoming call, answer?" or "Incoming
roam call, answer?" If the caller is recognized as a
contact entry in your phone, then the phone
prompts "Incoming call from (Name), answer?"
Say "Yes" or press and key except to the End key
to answer.
Say "No" and press the End key to silence the
alert. Remain silent. The voice alert repeats twice
and the phone rings once, then returns to the
home screen.
Voice Wake-Up
You can set your phone to make a call using a
hands-free.
Phone User Guide
Enable voice wake-up
Select >
jÉåì pÉííáåÖë
and one of the following:
sçáÅÉ=t~âÉJré
√
turns voice wake-up off.
aáë~ÄäÉÇ
√
allows you to make a call with
táíÜ=~ÅÅÉëëçêó
>
an accessory.
Use voice wake-up
To wake up the phone:
NK Say "Wake Up" and listen for a tone.
OK Say "Wake Up" again until you hear two tones.
If the phone does not recognize your Wake Up
command, see "Voice Training" on page 72.
> >
sçáÅÉ=cÉ~íìêÉë
73