Network - Kyocera E1000 User Manual

Power Backlighting
You can set backlighting to remain on when an
external power source, such as the AC adapter, is
used with the phone.
kçíÉW Power backlighting may not be available
with the optional desktop charger or other
accessories.
jÉåì pÉííáåÖë ^ÅÅÉëëçêáÉë
Select > >
_~ÅâäáÖÜíáåÖ
and one of the following.
√
kçêã~ä
sets power backlighting to normal.
√ ^äï~óë=lå
keeps power backlighting when an
accessory.
qáéW Use the power backlighting as a night light
when traveling.
Com Port Speed
The Com Speed sets the data rate at which your
phone connects to a laptop or PC, or at which it
sends and receives over-the-air text messages.
NK Select
jÉåì pÉííáåÖë ^ÅÅÉëëçêáÉë
> >
`çã=mçêí=péÉÉÇ
.
OK Select a speed.
There may be a higher charge for making calls
using high-speed data in areas where 1X service is
available. Check with your service provider for
details.
TTY Device
You can connect the phone to a TTY device for the
hearing impaired.
Phone User Guide
kçíÉW Enable TTY only when using the phone
with a TTY device.
NK Connect the TTY device to the phone.
OK Enter
@@UUV
with your keypad and select
jÉåì
or, select
qqv=aÉîáÅÉ
.
PK You will see a notification, select
mïê=
>
QK Select
qqv=lå
connect.
Hearing Aid
Enable your phone to operate with a T-coil
Hearing Aid device.
jÉåì pÉííáåÖë
Select >
eÉ~êáåÖ=^áÇ
and one of the following.
√
aáë~ÄäÉÇ
turns hearing aid off.
√
bå~ÄäÉÇ
turns hearing aid on.
kçíÉW Turn on only when being used with T-coil
Hearing Aid device.
>

Network

Data and Fax Calls
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. You cannot receive voice calls while
the phone is in data/fax mode.
To receive data or faxes, you must connect the
phone to a laptop or PC and switch the phone
from voice mode to data/fax mode.
qqv
.
pÉííáåÖë ^ÅÅÉëëçêáÉë
> > >
lh
.
qqv=lÑÑ
to connect or to not
^ÅÅÉëëçêáÉë qJÅçáä=
> >
55