PSC PT2000TM User Manual page 70

Programming the PT2000 and Top Gun
Figure 4-1: The PSC Portable Programmer (PERCPROG) Main Window
Figure 4-2: The Communications Settings window
60
3. From the menu, select
window will open (refer to
Settings
Select the desired serial port. Then select
4.
Note: After changing the serial port setting, PERCPROG will keep
the new setting until it is changed again. Use the icons in the
PSC PAL program group (Windows 3.1) or the Start Menu
(Windows 9x) to install an application.
5. From the PSC
The
Program File
Options > Settings
Portable Programmer
window will open (refer to
. The
Communications
).
Figure 4-2
.
OK
menu, select
File > Open
Figure 4-3
PT2000 & Top Gun PDTs
.
).