PSC PT2000TM User Manual page 38

Using the PT2000 and Top Gun with PALPRO
Figure 3-20: The Item ID Prompt
Figure 3-21: The Next Item ID Prompt
28
4. The
location ID
the screen, separated by a comma, and the second prompt remains
on the screen.
The portable is ready to accept another ID for an asset at the
current location.
When finished collecting asset IDs for the location, press the
5.
key to return to the first prompt.
Repeat steps
6. 2
collected.
Press the
7.
<F4>
Press the
8.
<F4>
The portable stores the collected data in a single ASCII text file. When
uploading the file to the PC, the data appears as a list. Each line in the
list contains two fields separated by a comma. The first field is the
location, and the second field is the equipment identification number.
The example in
Figure 3-22
portable that used
ASSETPRO
ITEM ID
¤
WH3E
F3=REV F4=EXIT
and appear together on the third line of
item ID
ITEM ID
¤
WH3E,004322
F3=REV F4=EXIT
- until IDs for each asset at every location is
5
key to return to the first prompt.
key to return to the application menu.
is part of a data file uploaded from a
to collect data.
PT2000 & Top Gun PDTs
<F4>