PSC PT2000TM User Manual page 53

Figure 3-54: Select
Figure 3-55: Select
Figure 3-56: Select
Figure 3-57: Entering the telephone number
User's Guide
SEND FILE
Use a cable supplied by your PSC dealer to connect the portable
3.
to your modem, and select
MODEM
Select to transmit the file at 2400 baud or
4.
<F2>
it at 9600 baud.
BAUD RATE
Enter the telephone number to dial. Be sure to use the format
5.
that your modem requires. (For example, you may need to use
"9," as a prefix for the number). When you press the
key on the keypad, the application connects to the modem and
calls the number.
6. When the modem connects to the remote computer, two-way
communications between the portable and the computer is
established. Use the portable to enter the commands you need to
prepare the computer to receive a file.
*FILE OPTIONS*
F2=SEND FILE
F3=ERASE FILE
F4=EXIT
from the send file menu.
<F3>
*SEND FILE*
F2=SERIAL
F3=MODEM
F4=EXIT
SELECT BAUD RATE
F2=2400,N,8,1
F3=9600,N,8,1
F4=EXIT
NUMBER TO DIAL
F4=EXIT
Collecting Data
to transmit
<F3>
<ENTER>
43