Getting Started
Upgrading to PPG v5.0
If you want to upgrade to PPG v5.0, complete the instructions in
on page 7
your PC's hard drive than PPG v4.5, so it is possible to have both versions
installed at the same time.
Prior PPG version source files (*.scr) are converted when you open and save
them in PPG v5.0. To maintain PPG v4.5 compatible applications, open them
in PPG v5.0 and save them with a new name or new location.
There is no keyboard wedge support in PPG v5.0. Applications created in previous
versions of PPG that use the keyboard wedge option can be saved in PPG v5.0, but
they must be updated with a new input method after you save them.
Uninstalling PPG
To uninstall PPG, use the standard method of removing programs installed on
Microsoft Windows:
Launching and Exiting PPG
Launching PPG
To launch PPG, complete the following steps:
8
7. Finally, a message that PPG has been successfully installed is dis-
played.
8. Press
to exit the installation.
Finish
. By default, PPG v5.0 is installed in a different default location on
1. From the Windows
Remove Programs
2. At the
Add/Remove Programs
along the left side of the window.
grams
3. Scroll down the screen until you locate
select it by clicking on it with your mouse.
4. Press
Change/Remove
1. Select PPG from your Windows
> PT Program Generator.
menu, select
Start
Settings > Control Panel > Add/
.
window, select
PT Program Generator
to initiate the program removal process.
Start Menu > PT Program Generator
PT Program Generator (PPG) v5.0
Installing PPG
Change or Remove Pro-
and