Table of Contents
Advertisement
Example Frames
Example data:
If duplicate Asset #'s are to be disallowed, the
the second field and, if found, display a message and disallow the entry. Enter
"12347" at the
Asset #
entry and append "
Use the
Default File
To search for a data in a file, complete the following steps:
150
Location
Asset #
Date
Time
Room 1,12345,2/24/2003,13:39:53
Room 1,12346,2/24/2003,13:39:58
Room 2,12347,2/24/2003,13:45:33
Room 2,12348,2/24/2003,13:39:43
prompt and store it in the
Asset #
, copy
to the
Asset #
*" onto the end of the entry so the result is:
,
~,12347,*
register in a
Lookup
to determine the existence of a duplicate record.
1. Input
into
Asset #
2. Copy the
Default Register Asset #
3. Copy insert "
" onto the front of the
~,
*" to the
4. Copy append"
,
5. In the
node,
Verify
and File as the File =
Type
6. In the
node,
Verify
Register as the
type.
Asset #
register, insert "
Lookup
node as the comparison type against the
Verify
Default Register Asset #
field to the
Lookup
register
Lookup
tab, select File as the
Verify Information
Default File
tab, select ASCII as the
Verify Options
type, and Lookup as the
Comparison
PT Program Generator (PPG) v5.0
must be looked up in
field
Default Register
" on the front of the
~,
field
register
Lookup
register
Data
type.
Data
Register
type,
Advertisement
Table of Contents
