PSC PT Program Generator User Manual page 189

Portable successfully
programmed
BEL received - Aborting.
No response - Aborting.
Too many NAKs - Aborting
Unknown response -
Aborting.
COM port error
Open COM error
Set COM state error
TimeOut exceeded
WriteComm error -
Aborting.
PDT does not support
application file. Recompile
for Falcon PT40.
User aborted
User's Guide
Error Messages
The application was successfully downloaded to the PDT.
These errors indicate that PPGXfer received an unexpected
response from the PDT. Reset the PDT and try the download
again.
These errors indicate problems communicating with the PDT
via the serial port. Make sure the cable is securely connected
to both the PC and the PDT. Verify that the correct serial port
has been selected and that the serial port is functioning.
This error indicates that the application was created for a dif-
ferent PDT than you are downloading to. Open the applica-
tion
Application
Save the application and select
pile the file and download it to the PDT.
The user aborted the download process.
Description
.scr
file in PPG. Select the
command and select the correct PDT type.
Error Messages
File > Customize
to com-
File > Download
177