PSC PT Program Generator User Manual page 158

Example Frames
Verify: DNLD
Display: WAIT
Input: TO FILE
Figure 119. The Input: TO FILE Dialog
Display: DONE
Display:
TIMEOUT
Input: FKEY
To download a file to a portable, set options for the
Serial
Time Out
Destination
Echo to Display
146
Checks to see if was pressed and, if it was, continues to the
<F3>
node. If was not pressed, the program loops back to the
play <F3>
node and waits for further input.
Input
Displays
Downloading, Please Wait
Starts downloading the file. Options in its dialog box are set as shown in
Figure 119 on page 146.
If downloading is successful,
DONE; <F3>= MORE; <F4>=QUIT
If downloading is unsuccessful,
OUT EXCEEDED; <F3>=TRY AGAIN; <F4>=QUIT
table's screen.
Both these nodes loop back to the
Display
accepts the user's function key input.
Selected for the
Input From
Selected for the
Input From
that prompts the user to try again.
et to the desired file. Choose to replace existing data or place new
S
data at the beginning or end of the file or at a given record number.
Enabled so that the user can see the file going into the portable unit.
PT Program Generator (PPG) v5.0
on the portable's screen.
displays
Display: DONE
on the portable's screen.
displays
Display: TIMEOUT
Input: FKEY
node as follows:
Input
option.
option. Should Link to a
Display
Dis-
DOWNLOAD
TIME-
on the por-
node, which
node