The Display: Enter Item Node; The Input: Item Node - PSC PT Program Generator User Manual

If you click twice on the
window. Clicking on any visible part of the
ground.
When Linking the
node first. Then create the Link to the
Link in the

The Display: Enter Item Node

You need to set up this node to display "Enter Item:" on the first line of the
portable's screen and have the fourth line of the screen tell the user to press
<F4>
node:
Figure 85. The Display: Enter Item

The Input: Item Node

Complete the following steps to set up this node:
User's Guide
3. Create all the nodes shown in
on the menu or icons on the
Create
cated by the first line of text in the node. Rename each node accord-
ing to the second line of text. Link the nodes together as shown.
Start
Verify: Input
node options of the
Next
to return to the Main Menu. Complete the following steps to set up the
1. Double-click the
box (refer to
Figure 85 on page 115
2. Type Enter Item: on the first line of the text entry area.
3. Use the keyboard navigation keys to move to the fourth line and enter
Menu.
4. Select to save your settings.
OK
1. Double-click the
Figure 86 on page 116
Building a Custom Portable Program
Figure 84 on page 114
Toolbar
or node, this frame will move to the background
Exit
Collect Data
node, create the Link to the
Copy: To File
node.
Verify: Input
node to open the node's dialog
Display: Enter Item
).
node to display its dialog box (refer to
Input: Item
).
, using commands
. Each node's type is indi-
frame will bring it to the fore-
Output: Error Beep
node. This will place the correct
115