Kenwood DDX795 Instruction Manual page 64

Installation and Connection Installation and Connection
Installing the unit
Installing the unit using the mounting
bracket removed from the car
π / "
*
Note: Select the appropriate screws (supplied) for the
mounting bracket.
* Only for DDX795/DDX775BH/DDX6018BT/DMX6018BT/
DDX5018BT/DDX595/DDX575BT.
Installing the unit using the mounting
sleeve
(Only for DDX795/DDX595)
'
Bend the tabs of the mounting sleeve with a
screwdriver or similar utensil and attach it in place.
62 ENGLISH
Installing the trim plate
(Only for DDX795/DDX6018BT/DMX6018BT/
DDX5018BT/DDX595)
π / " *
Car bracket
Removing the unit
(Only for DDX795/DDX595)
1
Engage the catch pins on the extraction
keys ( \ ) and remove the two locks on the
lower part of the trim plate (
2
Remove from the upper two catches of
the trim plate (
]
The frame can be removed from the top side in the
same manner.
3
Remove the unit by inserting the two
extraction keys (
illustrated.
] ).
Catch
Lock
Be careful to avoid injury from the catch pins on
the extraction key.
] ).
\ ), then pulling them as
\