Cisco NCS 5500 Series Configuration Manual page 169

BGP-based VPWS Autodiscovery
PE2:
PE2# show l2vpn discovery xconnect
Service Type: VPWS, Connected
List of VPNs (1 VPNs):
XC Group: gr1, MP2MP mp1
List of Local Edges (2 Edges):
Local Edge ID: 2, Label Blocks (1 Blocks)
Local Edge ID: 3, Label Blocks (1 Blocks)
List of Remote Edges (1 Edges):
Remote Edge ID: 1, NLRIs (1 NLRIs)
Status Vector: 9f ff
PE2# show l2vpn xconnect mp2mp detail
Group gr1, MP2MP mp1, state: up
VPN ID: 100
VPN MTU: 1500
L2 Encapsulation: VLAN
Auto Discovery: BGP, state is Advertised (Service Connected)
Route Distinguisher: (auto) 1.1.1.1:32775
Import Route Targets:
Export Route Targets:
Signaling protocol:BGP
CE Range:10
...
Label base Offset Size
---------- ------ ----
16045 1 10
Status Vector: 7f ff
Label base Offset Size
---------- ------ ----
16060 1 10
Status Vector: 7f ff
Label base Offset Size
---------- ------ ----
16030 1 10
2.2.2.2:100
2.2.2.2:100
BGP Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release 6.2.x
VPWS with BGP Autodiscovery and BGP Signaling
Time Created
-------------------
01/24/2009 21:09:14
Time Created
-------------------
01/24/2009 21:09:14
Peer ID Time Created
--------------- -------------------
3.3.3.3 01/24/2009 21:09:16
159