Cisco NCS 5500 Series Configuration Manual page 164

Configuring VPWS with BGP Autodiscovery and Signaling
SUMMARY STEPS
1. configure
2. l2vpn
3. xconnect group group name
4. mp2mp vpws-domain name
5. vpn-id vpn-id
6. l2 encapsulation vlan
7. autodiscovery bgp
8. rd { as-number:nn | ip-address:nn | auto }
9. route-target { as-number:nn | ip-address:nn | export | import }
10. signaling-protocol bgp
11. ce-id { number}
12. Use the commit or end command.
DETAILED STEPS
Step 1 configure
Example:
RP/0/RP0/CPU0:router# configure
Enters the global configuration mode.
Step 2 l2vpn
Example:
RP/0/RP0/CPU0:router(config)# l2vpn
Enters L2VPN configuration mode.
Step 3
xconnect group group name
Example:
RP/0/RP0/CPU0:router(config-l2vpn)# xconnect group gr1
Enters configuration mode for the named xconnect group.
Step 4 mp2mp vpws-domain name
Example:
RP/0/RP0/CPU0:router(config-l2vpn-xc)# mp2mp mp1
Enters configuration mode for the named vpws domain.
Step 5 vpn-id vpn-id
BGP Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release 6.2.x
154
BGP-based VPWS Autodiscovery