Wrong Duration Times Displayed Fd9208-9304; Heating - Bosch WAQ283S1GB Repair Instruction

7.2

Wrong duration times displayed FD9208-9304

Fault details
F14-D Bosch with small display from FD9208
– FD9304
After starting a program the duration times
were displayed wrong or not and/or the
wrong program is running, as examples:
- No program duration display at
program 60° prewash or 90°
- 40 minutes time instead of 15 minute
for super quick program.
- 43 minutes instead of 22 minutes for
spinning.
- 40 minutes instead of 1 minute for
draining
- Set program 60° but wool program is
running aso.
7.3

Heating

Fault details
Does not heat up or insufficiently.
209_58300000178575_ARA_EN_C.doc – 30.06.2015
Cause
Problems with capacitors at the operating
module.
Cause
NTC defect
Heater defect or with calcificaton
Remedial action
Exchange operating module
Remedial action
Check NTC and (see Measured-value
table)
if required replace.
Check heater and replace if necessary
Page 68 de 70