Unbalance Detection; Load Detection - Bosch WAQ283S1GB Repair Instruction

5.6

Unbalance detection

In every spin cycle, the drum balance is checked for 8 seconds at 90
rpm. This check is done up to 20 times. In wool program is just done
maximum twice.
Depending on which check is detected that the load is balanced, the
spin speed is reduced:
Tries 1 to 7: Spin speed at the selected value
Tries 8 to 10: 1200 rpm appliances reduce spin speed to 1000 rpm
1400 rpm appliances reduce spin speed to 1100 rpm
Tries 11 to 20: spin speed reduced to 900 rpm
If after 20 tries, the load remains unbalanced, the spin cycle will be
cancelled.
209_58300000178575_ARA_EN_C.doc – 30.06.2015
5.7

Load detection

Alter starting the program it is introduced 1l water, to closet he flap
system.
3l + 3l are introduced to drag the detergent.
After this moment, water flow is also controlled by the water flow, but
with the pressure sensor. Depending on the water that is introduced
in the washing machine, the module identifies 3 types of load:
►
Up to 3,5 kg ( max. aprox. 12 l )
►
Up to 5 kg ( max. aprox. 14 l )
►
Up to 7kg ( max. aprox. 18 l )
Note: This values are more precise, when the load in the washing
machine is more similar to the normalized used for the energy label.
Page 25 de 70