Power down the server (on page 9).
1.
Disconnect all peripheral cables from the server.
2.
Remove the server (on page 10).
3.
Remove the access panel (on page 11).
4.
Remove the drive cage.
5.
To replace the component, reverse the removal procedure.
Drive
To remove the component:
Power down the server (on page 9).
1.
Disconnect all peripheral cables from the server.
2.
Remove the server (on page 10).
3.
Remove the access panel (on page 11).
4.
Remove the drive cage
5.
("Drive
cage" on page 39).
Removal and replacement procedures 40