Power down the server (on page 9).
1.
Disconnect all peripheral cables from the server.
2.
Remove the server (on page 10).
3.
Remove the access panel (on page 11).
4.
Cut the tie wraps securing the cables, and then disconnect the cables.
5.
Remove the power supply.
6.
To replace the component, reverse the removal procedure.
Drive cage
IMPORTANT:
FlexibleLOM can cause physical interference, preventing installation of the drive cage.
To remove the component:
The drive cage is not compatible with all versions of the FlexibleLOM adapter. The
Removal and replacement procedures 39