tional problems such as foaming, filter plugging, ori-
fice or line plugging.
Flush system when switching lubricant brands.
When ambient conditions exceed those noted or if
conditions warrant use of "extended" life lubricants
contact Sullair for recommendation.
3.4 LUBRICATION CHANGE RECOMMENDATIONS AND MAINTENANCE
LUBRICANT
Sullube
SRF 1/4000
24KT
CP-4600-32-F
A - 8,000 Hours or once a year.
B - 4,000 Hours or more frequently if conditions so require.
C - When measured pressure loss exceeds 20 psig (1.3 bar).
D - When measured pressure loss exceeds 10 psig (0.7 bar).
E - When required by fluid analysis or known contamination.
F - Does not require replacement during normal service conditions.
G - Every 1000 hours.
3.3 APPLICATION GUIDE
FLUID CHANGE
FLUID FILTER CHANGE
A , E
B , E
F , E
B , E
SPECIFICATIONS
Sullair encourages the user to participate in a fluid
analysis program with the fluid suppliers. This could
result in a fluid change interval differing from that
stated in the manual. Contact your Sullair dealer for
details.
SEPARATOR CHANGE
G , C
G , C
G , C
G , C
Section 3
A , D
B , D
A , D
B , D
17