Table Of Specifications - Sullair LS-120 series Operators Manual And Parts Lists

3.1 TABLE OF SPECIFICATIONS

LS-12 SERIES 50 Hz
MODEL (I) KW
H, HH, XH 37
HH, XH 45
LS-12 SERIES 60 Hz
MODEL (I) HP
L, H, HH 40
L, H, HH, XH 50
H, HH, XH 60
LS-16 SERIES 50 Hz
MODEL (I) KW
H, HH, XH 45
H, HH, XH 56
L, H 75
LS-16 SERIES 60 Hz
MODEL (I) HP
L, H, HH 60
L, H, HH, XH 75
L, H 100
(I)
Includes standard and 24KT. Rated pressure designations appearing after model number are as follows:
"L"- 100 psig /6.9 bar
"HH"- 150 psig/10.3 bar
Maximum pressure is rated pressure and 10 psig (0.7 bar).
(II) (Except for 16-100 60Hz models) Height listed is for models without enclosure. Height for enclosed models is 1588 mm/
62.5 in. Add an additional length of 102 mm/ 4 in. (non-enclosed models) or 229 mm/ 9 in. (enclosed models) for servic-
ing the separator.
COMPRESSOR:
Type:
Standard Operating Pressure (III):
Bearing Type:
Ambient Temperature (Max.) (IV):
Cooling:
Compressor Fluid:
Sump Capacity:
Control:
(III) Special compressors are available for operation at higher pressures.
(IV) Special compressors are available for operation in higher ambient temperature.
LENGTH WIDTH
MM MM
1829 1219
1829 1219
LENGTH WIDTH
IN IN
72 48
72 48
72 48
LENGTH WIDTH
MM MM
1829 1219
1829 1219
1829 1219
LENGTH WIDTH
IN IN
72 48
72 48
72 48
For latest sound test data, consult Sullair Factory.
"H"- 125 psig/8.6 bar
"XH"- 175 psig/12 bar
STANDARD MODELS
Rotary Screw
100 psig (6.9 bar) (L)
125 psig (8.6 bar) (H)
Anti-Friction
105°F (41°C)
Pressurized Fluid
Sullair Sullube
8.0 U.S. gallons (30 liters)
Electro-Pneumatic
Supervisor Controller (optional)
SPECIFICATIONS
HEIGHT(II) WEIGHT KG
MM OPEN/ENCLOSED
1524 1043/1220
1524 1134/1311
HEIGHT(II) WEIGHT LB
IN OPEN/ENCLOSED
60 2270/2660
60 23002690
60 2500/2890
HEIGHT(II) WEIGHT KG
MM OPEN/ENCLOSED
1588 1220/1442
1588 1233/1456
1588 1243/1546
HEIGHT(II) WEIGHT LB
IN OPEN/ENCLOSED
60 2690/3180
60 2720/3210
59.4 2740/3410
150 psig (10.3 bar) (HH)
175 psig (12 bar) (XH)
Section 3
15