To Set The Selected Food Temperature (Use Default Temperature) For Probe 2; Temperature Alerts Function - Weber 6741 Instruction Manual

3. To set the selected food temperature (use default temperature) for probe2

Temperature Alerts Function

The unit is with preset alert function. When the probe temperature is less than the set
temperature10ºF, the receiver will alarm you by one beeping for 1 second then stop 2
seconds and repeat 6 times, and the current temperature value will flash on LCD screen,
press any key to stop the alert.
In normal MODE, when the set temperature is reached, the receiver will alarm you by
one beeping for 1 second then stop 1 second and repeat. The probe temperature will
blink along with the alarm sound. At the same time the alert icon flash on display. To
cancel the alert, press any button on the Receiver unit.
Unplug Probe Alert.
The transmitter unit will has long beep when unplug the probe, press any key to stop
alarm.
TIMER MODE
10