Sfp+ Modules And Optic Requirements - Dell Networking M8024-k Reference Manual

2

SFP+ Modules and Optic Requirements

When selecting optic transceivers or cables for SFP+ modules described in this document, it is
important to understand that while some SFP+ ports accepts both 1G and 10G, not all do. As seen in
fixed port
the table below, most
optics; however, the expansion module ports
Table 1
Port Type /Switch
3. M8024
6. M8024-k
9. Force10 MXL
12. 62XX
15. 70XX
18. 81XX
21. N30XX
24. N40XX
Dell Networking switches that do not accept expansion modules are not listed in the table above, even
though they may contain SFP+
7 Expansion Modules for Dell Networking Switches
SFP+ ports on Dell Networking switches allow both 10G and 1G SFP+
often allow only 10G optics.
SFP+ expansion module
ports
M6220
fixed
ports (e.g. M6348 and 8000 series).
1. 10G only
4. 10G only
7. 10G only
10. 1G and 10G
13. 10G only
16. 1G and 10G
19. 1G and 10G
22. 1G and 10G
25. 1G and 10G
SFP+ fixed ports
2. n/a
5. n/a
8. 1G and 10G
11. n/a
14. n/a
17. n/a
20. 1G and 10G
23. 1G and 10G
26. 1G and 10G