Cirrus SR22 Pilot Operating Handbook page 348

Section 9
Supplements
Section 3 - Emergency Procedures
Autopilot Malfunction
Refer to Electric Trim/Autopilot Failure procedure in the SR22 POH. Do
not reengage the autopilot until the malfunction has been identified
and corrected. The autopilot may be disconnected by:
1. Pressing the A/P DISC/Trim switch on the control yoke handle.
2. Pulling the AUTOPILOT circuit breaker on Essential Bus.
Altitude lost during a roll or pitch axis autopilot malfunction and
recovery:
Flight Phase
Climb
Cruise
Descent
Maneuvering
Approach
6 of 24
Bank Angle
40°
45°
40°
10°
10°
Cirrus Design
SR22
Altitude Loss
200 ft
300 ft
350 ft
60 ft
80 ft
P/N 13772-108
Revision 06: 05-09-11