Assembly - ProForm PFTL517040 User Manual

Proform user's manual front runner treadmill pftl517040
Table of Contents

Advertisement

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dis-
pose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is
coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top
of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If
there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive
cleaner.
Assembly requires the included allen wrench
adjustable wrench
5/16" Star
Washer (77)–4
Shock Bolt (116)–2
Upright Bolt (83)–4
1. Make sure that the power cord is not plugged in. With
the help of a second person, raise the Frame (38) to the
vertical position; do not raise the Frame past the vertical
position.
While the second person holds the Frame (38), attach the
Right Rear Endcap (58) to the end of the Frame with a 3/4"
Tek Screw (65). Be careful not to overtighten the Screw.
Attach the Right Foot (117) to the bottom of the Right Rear
Endcap with a 2" Screw (48).
Attach the Left Rear Endcap and the Left Foot (not shown)
in the same way. Carefully lower the Frame to the floor.
2. With the help of a second person, carefully tip the tread-
mill onto its left side. Partially fold the Frame (38) so that
the treadmill will be more stable. Do not fully fold the
treadmill.
Attach the four Base Pads (99) (only two are shown) to
the bottom of the Base (69) with four 3/4" Tek Screws (65).
Attach a Wheel (95) to the Base (69) with a Wheel Bolt (94)
and a Wheel Nut (20). Do not overtighten the Wheel
Bolt; the Wheels must be able to turn freely.
. For help identifying assembly hardware, see the drawings below.
Shock Nut
3/8" Star
Washer (87)–4
Console Bolt (78)–4
and your own phillips screwdriver
Wheel Nut
(124)–2
(20)–2
1
48
2
65
6
3/4" Tek Screw (65)–6
Latch Screw (74)–2
2" Screw (48)–2
Wheel Bolt (94)–2
117
58
38
38
99
69
65
20
and
65
94
99
95

Advertisement

Table of Contents
loading

This manual is also suitable for:

Frontrunner

Table of Contents