Answering Calls - AT&T STX-2 User Manual

BASIC FUNCTIONS

ANSWERING CALLS

1.
When your STX-2 rings or vibrates, tap
to answer the incoming call. (Depending on your phone's settings,
you may also answer incoming calls by opening the phone or by
pressing any digit key.)
To ignore incoming calls, tap Ignore or press the
WAIT/PAUSE FEATURE
Pauses are used for automated systems (i.e., voicemail, calling cards).
Insert a pause after a phone number then enter another group of
numbers. The second set of numbers is dialed automatically after the
pause. This feature is useful for dialing into systems that require a code.
1.
To insert a wait/pause, enter a phone number then press and hold the
* button until "T" appears, or press and hold the
"P" appears.
• Type " P" : When you call automated systems (like banking services), you
are often required to enter a password or account number. Instead
of manually entering the numbers each time.
• Type " T" : A two second pause stops the calling sequence for two seconds
and then automatically sends the remaining digits.
2.
Tap Call or press the SEND Key to dial.
Answer or press the SEND Key
Power/END Key.
# button until
31