Mass Storage Device - AT&T STX-2 User Manual

PC CONNECTIvITY

MASS STORAGE DEvICE

Your device can be used as an external memory device.
1.
Before you connect the device, set your device to Mass Storage
Mode. To do this, tap the Menu icon,
Settings icon and select Phone > USB Connection Mode
Storage > Save.
You will need a microSD card to use Mass Storage. If you attempt to
Note
connect to Mass Storage via USB without a card, "SD not
found, cannot access to Mass Storage" will appear.
2.
Connect the STX-2 to your PC with a USB cable.
3.
It is ready when "Found New Hardware USB Modem" appears on
the screen.
4.
Select "My Computer" on the PC.
5.
The phone's memory card will be listed under "Devices with
Removable Storage" in the same location as an optical drive.
6.
File explorer will open in a new window.
7.
Drag and drop the desired files content from the PC window to the
"Storage Card" window.
8.
Disconnect the device from the cable.
Drag Leftward then tap
> Mass
137