Table of Contents
Advertisement
Aviom A-16R and A-16CS User Guide
9
10
11
12
Note: The text on the right side of the A-16CS Control Surface
reads "In Recall Mode All Volumes Zero" as a reminder that
this function is always available.
Changing Channel Settings
When the A-16CS Control Surface is used to control an A-16R
remotely, all edits made on the A-16CS will be reflected immediately
on the A-16R.
To make a change to a Channel using the A-16CS Control Surface,
first select a Channel by pressing a numbered button. Then the
Channel is available for editing.
On the A-16CS Control Surface you can change
•
•
•
•
•
In addition to these changes, you can use Solo Mode to audition your
edits to a Channel while all other Channels are temporarily silenced.
All mix editing features function as previously described in the A-16R
section of this document.
Channel Volume and Pan Control
When you change the volume of a Channel from the A-16CS, the LEDs
in the Volume section of the Personal Mixer and A-16CS will move
simultaneously and will indicate the level changes in real time. There
are twelve LEDs in the Volume indicator, each capable of displaying
two levels, for a total of twenty-four visible lighted steps. When no
LEDs are lit, Channel volume is at its minimum setting.
48
Solo
Mute
13
14
15
16
Volume
Panning for mono channels
Spread for stereo channels
Mute status
Grouping
All Volumes Zero
In Recall Mode
All Volumes
Zero
Select
Mute
Advertisement
Table of Contents
