Button Behaviors - Aviom A-16CS User Manual

Button Behaviors

There are various combinations of lit and unlit buttons on the A-16CS
Control Surface. They are the same as those found on the A-16R. Here
is an overview:
• Channel buttons have two LEDs, an upper and lower.
The upper button is red and indicates that the Channel
is selected. The lower button is yellow; it indicates that
the Channel is muted. Channel buttons will light solid
or flash.
• The R
ECALL
the R
ECALL
now select a Preset by touching any numbered button.
• There is one LED in the G
G
ROUP
indicates that you can now build or edit a Group.
• The R
ECALL
held down simultaneously. This is the Save Mode, as
indicated by the connecting graphic above the two
buttons on the front panel.
• When a Preset is saved, all sixteen Channel buttons
will flash briefly to confirm the Preset save operation.
• The S
OLO
pressed, indicating that the selected Channel or Group
is now being auditioned with all other Channels being
muted.
• The M
UTE
button with a Channel selected will cause the Channel's
lower (yellow) LED to light.
There is also one special button combination, the R
followed by the M
serves a twofold function:
• If there is a sudden change in the audio volume coming
through the monitor system, this button combination
silences all audio channels instantly.
• When starting from scratch to create a mix, use this
function to set all sixteen channels to zero volume and
all pans to the center settings.
button has one red LED. It flashes when
button is pressed, indicating that you can
button is pressed, the LED flashes. This
and G buttons will both flash when
ROUP
button has one LED. It will light when
button has no LED in it. Pressing the M
button. When used together this combination
UTE
button. When the
ROUP
ECALL
UTE
button
47