Table of Contents
Advertisement
Aviom A-16R and A-16CS User Guide
• The R
• When a Preset is saved, all sixteen Channel buttons
• The S
• The M
There is also one special button combination, the R
followed by the M
serves a twofold function:
• If there is a sudden change in the audio volume coming
• When starting from scratch to create a new mix, use
9
10
11
Note: The text on the right side of the label strip reads
Making Changes to Channel Settings
The A-16R Personal Mixer has one set of common controls used
for mix editing. A simple convention is used: to make a change to a
Channel, first select it. Then the Channel is available for editing.
On the Personal Mixer you can change:
•
28
and G
ECALL
held down simultaneously. This is the Save Mode, as
indicated by the connecting graphic above the two
buttons on the front panel.
will flash briefly to confirm the Preset save operation.
button has one LED. It will light when
OLO
pressed, indicating that the selected Channel or Group
is now being auditioned with all other Channels being
muted.
button has no LED in it. Pressing the M
UTE
button with a Channel selected will silence the Channel
and cause the Channel's lower ( yellow) LED to light.
button. When used together this combination
UTE
through the monitor system, this button combination
silences all audio channels instantly.
this function to set all sixteen channels to zero volume
and all channel pans to the center setting.
12
13
"In Recall Mode All Volumes Zero" as a reminder
that this function is always available.
Volume
buttons will both flash when
ROUP
14
15
16
UTE
button
ECALL
Advertisement
Table of Contents
