Table of Contents
Advertisement
Aviom A-16R and A-16CS User Guide
A-16CS Remote Control Surface Features:
• Controls all front-panel functions on the A-16R
• Sixteen Channel select buttons with dual LEDs
• Dedicated Recall, Group, Solo, and Mute buttons
• Pan/Spread control with LED readout
• Footswitch jack for Preset Up/Down control
• Can be mounted on the optional MT-1 mic stand mount
System Options:
• A-16D A-Net Distributor
• A-16D Pro A-Net Distributor
• MT-1 mic stand mount for the A-16CS Control Surface
Conventions Used in this Document
Button Presses
When indicating a button on the front panel of the A-16R Personal
Mixer or A-16CS, a special typeface is used. For example, "when
selecting a Preset, press the R
button".
Using Personal Mixers
It is possible to create a personal monitor system using any
combination of Aviom Personal Mixer products. In some cases the
information in this document can refer to either the table-top version
of the Personal Mixer, or the rack-mounted A-16R version.
When using the A-16R Personal Mixer with the optional A-16CS
Control Surface, many of the same buttons and functions are available.
When referring to the use of the mixers in a Personal Monitor Mixing
System in general, the terms A-16 Mixer or Personal Mixer are used
to describe a case where a standard A-16 or A-16II Personal Mixer, the
A-16CS remote Control Surface, or a rack mounted A-16R Personal
Mixer can be used.
Optional Remote Control
When using the A-16R in a monitor system, the A-16CS Control
Surface can be used as an optional remote control device. This enables
the A-16R to be placed at the rear of the stage or in another remote
location while at the same time providing the user with complete
2
button, followed by a numbered
ECALL
Advertisement
Table of Contents
