Table of Contents
Advertisement
Information
• To enable auto key lock regardless of the specified time
period, you can press Q for 1 or more second On the
Stand-by display (with phone closed).
• The auto key lock is not enabled when the camera shooting
screen is displayed or you are shooting even when the
phone is closed.
• You can receive an incoming call during the auto key lock.
Releasing Auto Key Lock
You can release the auto key lock by opening
phone, and also release it when the phone is closed.
1. FE or M Release lock ] C
Setting PIN Code Request
C ]
You can set to enter PIN1 code every time you turn on the
power to the phone.
Setting item/Setting at purchase
1. From the Settings menu (P85), "Lock/Security" ]
"PIN code request" ] "ON"/"OFF" ] Enter PIN1
code ] C
(Settings) ] 73
> P256
Changing Your Password
Changing the PIN1 code / PIN2 code
C ]
C ]
You can change the PIN1 code / PIN2 code. To change
the PIN1 code, you need to set "PIN code request" to
"ON" beforehand. The code is set to "0000" at purchase,
but you can change to any number as desired.
• In case you purchase a new phone and start
using it inserting the UIM you have been using, use the
PIN1 code / PIN2 code you have set.
1. From the Settings menu (P85), "Lock/Security" ]
"Change password" ] "PIN1 code"/"PIN2 code"
Settings
(Settings) ] 741/
(Settings) ] 742
101
Advertisement
Table of Contents
