Table of Contents
Advertisement
Using the Submenus of the Talking Screen
Setting item/Setting at purchase
1. From the Talking screen (P58), M [Menu] ]
Select from the following submenu items
End call
The call is disconnected.
Hold
You can put the call on hold. You can cancel the
I
function by pressing
Substitutive image/Camera image
You can switch to the Substitutive image for sending
to the other party. > P95
Camera settings
You can set the camera of Video-phone call. You can
select the icon by pressing J. After setting, press
I [Close].
–
Zoom : The camera image is zoomed. (x1/x2)
–
Brightness : You can change the brightness of
photo images.
–
Night mode : You can set it up when using the
camera in a dark place.
Video-phone settings
You can set the display of Video-phone call. After
setting, press I [Done]. > P94
> P257
[Active].
Making/Receiving Video-phone calls
– Display setting : You can set the display method
for the Talking screen.
• Both : The other party's image and your image
are displayed.
• Other : Only the other party's image is displayed.
• Me : Only your image is displayed.
– Sub screen : If you select "Both" of "video-phone
settings", you can set the image which displayed
each screen.
• Me : Only your image is displayed.
• Other : Only the other party's image is displayed.
– Display light: You can set the lighting method of
the backlight on the Talking screen.
• Always on : Always lights during a call.
• Terminal setting : Follows the setting of
"Backlight". > P83
Sending image quality
You can set the quality of images to be sent to the
other party.
– Normal : Sends images in standard quality and
motion speed.
– Prefer motion quality : Sends images laying stress
on motion speed. Prefer motion quality is effective
for moving images.
– Prefer image quality : Sends images laying stress
on image quality. Prefer image quality is effective if
there is little motion.
59
Advertisement
Table of Contents
