Table of Contents
Advertisement
Confirming before use
Ç=égópëOÇÃämîF
• The continuous standby time for standstill is the
average number of hours you can use the
phone in standstill status when it is closed and can
receive radio waves normally.
• The continuous standby time for in motion is the
average number of hours you can use the
phone in the combined status of "standstill", "moving"
and "out of the service area" when it is closed, in an
area where it can receive radio waves normally.
• The talk/communication time and standby time will
also be shorter than the above-mentioned estimates
when you perform data transmission or multi-access
or when you use the camera.
a
Estimated time for charging battery
AC Adapter 01
• The estimated charging time is for when the
phone is off and the battery is being charged from
empty. The charging time will be longer if you charge
the battery with the power turned on.
a
Other precautions
• Do not use any other adapter than the specified one.
It may shorten the life of the battery pack.
44
Approx. ••• minutes
Turning Power ON
• Before you turn on the power, make sure that the UIM is
inserted and that the battery is fully charged.
1. Press P for 2 or more seconds
• After the Wake-up display is displayed, the Stand-by
display appears.
Information
• If "PIN code request" (P101) is set to "ON", you need to enter
the PIN1 code.
• If "All lock" (P99) is set to "Power on", you need to enter the
terminal security code.
Turning Power OFF
1. Press P for 2 or more seconds
• Select "Yes" on the Confirm display when the
phone is closed.
• The Exit display appears and the power is turned off.
Information
• The time to turn off the phone may be long. Depending
on the status of network, the lead time may differ. During
switching off the power, do not repeat to power on/off.
Advertisement
Table of Contents
