Main unit
1
LED unit left assy disassembly
1. Remove the screw 1, and then remove the LED lower cover left 1 from
the LED upper cover 2.
2. Disconnect the connector of the LED wire assy LED 3 from the LED
PCB supply assy 4.
3. Remove the 2 screws 2, and then remove the LED PCB supply assy 4,
LED light base 5 and the LED base plate left 6 from the LED upper
cover 2.
2
LED unit right assy disassembly
1. Remove the screw 1, and then remove the LED lower cover right 1 from
the LED upper cover 2.
2. Disconnect the connector of the LED wire assy LED 3 from the LED
PCB supply assy 4.
3. Remove the 2 screws 2, and then remove the LED PCB supply assy 4,
LED light base 5 and the LED base plate right 6 from the LED upper
cover 2.
Needle bar unit
2 - 41
1
1
2
2
2
3
6
5
4
1
1
2
2
2
3
5
4
6