Cord Grip Attachment - Brother PR655 Service Manual

Main unit
13

Cord grip attachment

1. Connect the FFC (SML2CD-C) 1 to the connect PCB, and lock the
connector.
2. Connect the X-feed motor's lead wire to the connect PCB.
3. Bind the X-feed motor's lead wire and the FFC (SML2CD-C) 1 with the
cord grip 2, and then tighten the screw 1.
*Key point
• Insert the X-feed motor's lead wire into the groove 3 on Y-
carriage L.
1
Feed unit
Screw, Bind
0.59 — 0.78 N-m
M3X4
3 - 86
1
Torque
1
2
3