3. Connect the SCSI signal cable to the adapter and one or more of the signal
4. Connect the SCSI activity indicator cable to the adapter and to the SCSI LED
5. If you have other adapters or options to install or remove, do so now.
6. Reinstall the rear adapter support bracket; then, rotate it to the closed (locked)
7. Replace the frame-support bracket, and replace the air duct.
8. Replace the cover. See "Replacing the cover" on page 21 for details.
9. Reconnect the external cables and power cords; then, turn on the attached
Installing internal drives
Different types of drives enable your computer to read various types of media and
store data in different formats. Your computer comes with the following drives
preinstalled:
v Diskette
v Hard disk
v CD-ROM, DVD-ROM, or CD-RW
18
IBM IntelliStation E Pro Types 6216 and 6226: Installation Guide
cable connectors to the rear of the SCSI devices.
connector on the system board. See "System board" on page 13 for the location
of the SCSI LED connector.
position.
devices and the computer.