Advertisement
Care and Maintenance
Keep the cadence sensor clean. Clean it with a mild
soap and water solution, and rinse off with clean water.
Dry it carefully with a soft towel. Never use alcohol or
any abrasive material, such as steel wool or cleaning
chemicals. Do not immerse the cadence sensor in
water.
Your safety is important to us. Check that you can turn
your handlebars normally, and that the cable wires for
brakes or gears do not catch the sensor. Make sure the
sensor does not disturb pedaling or using the brakes or
gears. While riding your bike, keep your eyes on the
road to prevent possible accidents and injury. Avoid
hard hits as these may damage the sensor.
Replacement magnet sets can be purchased separately.
Cadence sensor battery
The battery cannot be replaced. The sensor is sealed in
order to maximize mechanical longevity and reliability.
To purchase a new sensor, contact your authorized
Polar Service Center or retailer.
The battery level of your sensor is displayed on the
®
receiving device if it supports Bluetooth
Battery
Service.
To increase battery life, Polar Cadence Sensor
®
Bluetooth
Smart goes into power saving mode in ten
minutes if the magnet is not passing the sensor.
E N G L I S H
5
Advertisement
