Advertisement
Installing the Cadence Sensor
For a video tutorial, see Installing Polar
Cadence Sensor Bluetooth
www.polar.com/en/polar_community/videos.
To install the cadence sensor and cadence
magnet, you need cutters.
1.
Check the chain stay for a suitable place
for the cadence sensor (picture 2). Do not
install the sensor on the same side as the
chain. The Polar logo on the sensor should
be facing away from the crank (picture 4).
2.
Attach the rubber part to the sensor
(picture 3).
3.
Clean and dry a suitable place for the
sensor and place the sensor on the chain
stay (picture 4 A). If the sensor touches the
rotating crank, turn the sensor slightly
upwards. Pass the cable ties over the
sensor and rubber part. Do not tighten them
fully yet.
4.
Place the cadence magnet vertically on the
inner side of the crank (picture 4 B). Before
attaching the magnet, clean and dry the
area thoroughly. Attach the magnet to the
crank and secure with the tape.
®
Smart at
E N G L I S H
3
Advertisement
