Using the Override Dialog Box
The Override dialog box appears when you click on an override icon.The instructions in the
Override dialog box will vary depending on the type of override:
1. In the Override dialog box, enter a value in the Change Value To field.
2. If you selected the optional check box, enter an expiration time in the fields.
3. Click Save to initiate the override.
1. Select one of following override options:
2. Click Save after selecting one of the above options.
and will expire at a designated time.
See above instructions for
point and will expire at a designated
BAS-SVU025A-EN
No Override — a user override is currently not in effect for the point.
To set an expiration time, select the Allow this change to expire in check box. (This is optional).
Note: All overrides default to expire in 2 hours.To make the override permanent, uncheck the
Allow this change to expire in check box.
Override present —a user override is in effect for this point.
• Release all manual overrides (Select this option to end the current override and return the
point to system control.)
• Control point value (Select this option to change the override value.)
a. Enter a value in the Change value to field. For binary and multistate points, a drop-down list
appears. For Analog points, a text box appears.
b. To designate a time for the override to expire, use the Allow this change to expire in fields.
Temporary override — a user override is currently in effect for this point
" Temporary override — a user override is currently in effect for this
time."
Point Overrides
35