Editing The Navigation Tree - Trane Tracer SC Operation Manual

Editing the Navigation Tree

The navigation tree can be customized according to your preferences and facility needs.The tree
must be unlocked before any editing can be done.
Adding a Custom Graphics Node to the Tree
1. Click the custom graphics icon
2. Select a graphic from list. (A filtering option is available for your convenience).
3. Click next.
4. Save the graphic (template or otherwise).
Editing a Node on the Tree
1. Click to select one or more nodes on the tree.
2. Click the edit node icon
3. Select an action: Modify custom graphic assignment, or Reset custom node labels to default.
4. Follow the instructions in the dialog box to complete the action.
Adding a Custom Folder to the Tree
1. Click the add folder icon
2. Click once on the folder to place in edit mode, then rename the folder.
Deleting a Node from the Tree
1. Select a node or folder on the tree (text displays in bold when properly selected).
2. Click the delete icon
Undoing a Change to the Tree
While editing the tree, you can undo a change by clicking on the undo icon
undone back to the point where the tree was unlocked for editing.The undo icon will be active only
when there are actions that can be undone.
Redoing a Previously Undone Change to the Tree
While editing the tree, you can redo a previously undone change by clicking on the redo icon
when there are actions that can be redone.
Reseting the Tree to Standard Configuration
You can reset the tree to its standard configuration by clicking on the eraser icon
Viewing Help for the Navigation Tree
Click the help icon
BAS-SVU025A-EN
Graphics Node to the Tree dialog box appears.
If the graphic is associated with a template, a tree with all the devices on the SC is displayed.
You can then select the equipment with which to associate the graphic. If the graphic is not
associated with a template, a pane with the ability to save the graphic is displayed.
appears.
tree, or below a selected node.
The selected item is deleted.
. The redo stack is cleared once a new operation is performed.The redo icon will be active only
to view help topics pertaining to the navigation tree.
located on the navigation tree edit bar.The Add a Custom
located on the navigation tree edit bar.The Edit Nodes dialog box
located on the edit bar. A new folder appears at the bottom of the
located on the navigation tree edit bar.
The Navigation Tree
. Actions can be
17