Cisco ASR 1004 Overview And Installation page 36

Connecting a Terminal to the Cisco ASR Series 1000 Route Processor Console Port
The following shows the route processor console port.
Figure 20: Cisco ASR 1004 Router ASR 1000 Series Route Processor Console Port
1
SUMMARY STEPS
1. Connect one end of the RJ-45 cables to the serial RJ-45 port (CON) on the Cisco ASR 1000 Series Route
Processor 1 (see
page
2. Run the cable up and through the cable-management bracket and connect the other end of the RJ-45 cable
to the RJ-45 adapter (see the following image).
3. Connect the adapter to your video terminal to complete the cable connection.
4. Power on your video terminal.
5. Configure your video terminal to match the following default console port settings:
6. Go to the
installation.
Cisco ASR 1000 Series Router Hardware Installation Guide
36
CON port connection
Figure 20: Cisco ASR 1004 Router ASR 1000 Series Route Processor Console Port, on
36).
Connecting the Network Management and Signal System Cables, on page 38
Cisco ASR 1004 Router Overview and Installation
2 AUX port connection
to continue the