Cisco ASR 1004 Overview And Installation page 18

Hide thumbs Also See for ASR 1004:

Table of Contents

Two-Post Rack Installation

The following image shows where to attach the chassis rack-mount brackets to the equipment rack.

Figure 10: Attaching the Rear Rack-Mount Brackets to the Cisco ASR 1004 Router

Step 2

Slide the chassis into the rack, pushing it back until the brackets meet the mounting strips or posts on both sides of the

rack.

Step 3

Keeping the brackets flush against the posts or mounting strips, align the holes in the brackets with the holes on the rack

or mounting strip.

Step 4

For each bracket, insert and tighten two screws to the rack on both sides.

What to Do Next

This completes the procedure for installing the chassis on a two-post rack. Proceed to the

Ground Connection, on page 21

Cisco ASR 1000 Series Router Hardware Installation Guide

Rack-mount bracket ear and

holes

to continue the installation.

Cisco ASR 1004 Router Overview and Installation

Rack equipment rail

Attaching a Chassis

Table of Contents