HoMedics BPA-2000-EU Instruction Manual page 11

Error search
this section includes a list of error messages and frequently asked questions for problems you may encounter
with your blood pressure monitor. if irregularities occur during use, please check the following items.
PROBLEM
Display is dim or will
No power
not light up.
Low batteries
E 1 shows
E 2 shows
E 3 shows
E 10 or E 11 shows
Error Message
E 20 or E 21 shows
Eexx, shows on the
display.
if the device still does not function, please contact the store where the device was purchased. do not attempt
to open the device or adjust any of the inner parts yourself.
SYMPTOM
Batteries are exhausted.
Batteries are inserted
incorrectly
Show on the
Batteries are low.
display
The cuff is not secure.
The cuff is very tight
The pressure of the cuff is
excess.
The monitor detected
motion while measuring
Measure incorrectly
System error.
CHECK THIS
11
REMEDY
Replace with new batteries
Insert the batteries correctly
Replace with new batteries
Refasten the cuff and then
measure again
Refasten the cuff and then
measure again
Refasten the cuff and then
measure again
Movement can affect the
measurement. Relax for a
moment and then measure
again
Relax for a moment and then
measure again
Retake the measurement. If
the problem persists, contact
the retailer or our customer
service department for further
assistance. Refer to the
warranty for contact
information and return
instructions.