Hoover WDWFT4138AH Manual page 12

WARNING:
Don't touch the display (and the Touch
Control) while inserting the plug because
the machines calibrates the systems
during the first seconds: touching the
display, the machine couldn't work
property. In this case, remove the plug
and repeat the operation.
Touch Control
1) ON/OFF button
Press for at least 1 second the ON/OFF
button to turn on the appliance. Switching
on, the related indicator will light on, as well
as the "X Red Light", waiting for the
selection of a washing programme. If a
programme is not selected within 30
seconds, the appliance will automatically
turn off. Waiting for the selection of the
programme the display is off.
2) PROGRAMME SELECTION button
Turning on the appliance is also possible by
pushing for at least one second the button
of a selected programme (the display will
light up, showing the parameters of the
selected cycle). To set another programme,
press the related button (the corresponding
indicator light will light up). To switch off the
appliance, press the ON/OFF button (for at
least 3 seconds).
3) BUTTON SELECTION indicators
They light up at the touch of the related
button.
4) "X Red Light"
It lights up at the pressing of any button of
the Touch Control, with a diffused lighting
fading to the edges.
It gradually turns off within 5 minutes since
the last touch of a button, in order to save
energy.
START/PAUSE button
Close the door BEFORE selecting the
button START/PAUSE.
l
Press to start the selected cycle.
When the START/PAUSE button has
been pressed, the appliance can take
few seconds before it starts working.
ADD OR REMOVE ITEMS AFTER THE
PROGRAMMES HAS STARTED (PAUSE)
l
Press and hold the START/PAUSE
button for about 2 seconds (some
indicator light and the time remaining
indicator will flash, showing that the
machine has been paused).
l
Wait until the DOOR LOCKED light has
gone out before opening the door.
12