Hoover WDWFT4138AH Manual page 15

If a washing
compatible with
selected, this function
activated.
If you exceed the maximum dryable
load of laundry indicated in the
programme table, the laundry may not
be dried satisfactory.
l
If you want delete the selection before
the programme starts, please press
repeatedly the button until the lights go off
or press the ON/OFF button (for at least
3 seconds).
l
Drying only cycle:
select via the knob the desired drying
programme in conjunction with your
fabrics, by pressing this button it is
possible to select a degree of dryness
that is different to the default one (except
for the wool drying programme).
l
To cancel the cycle during the drying
phase, please press the button for about
3 seconds.
WARNING:
After cancelling
programme, the cool down phase will
begin and please wait for about 10/20
minutes before opening the door.
l
"End" will appear in the display at the
end of the program and the DOOR
LOCKED light will go off, it is now
possible to open the door.
It is also possible to cancel the drying
cycle by turning the programme
selector to the OFF position. It is
necessary to wait for the cooling
phase's end (10/20 minutes) and the
DOOR LOCKED light to go off before
opening the door.
programme is
automatic drying
will not
the drying
not
FAVOURITES button
be
This function allows you to save the settings
of your two
programmes, including the temperature,
spin speed and soil level, so you can recall
them quickly.
How to memorize a programme for the
first time:
1) Select
options you want.
2) Press the
choosing either M1 or M2. You should
choose
programme you have saved.
3) Keep
FAVOURITES button for about 3
seconds to save the combination in
the chosen position.
Memorize a new programme when M1 &
M2 already have programmes saved:
1) Set the programme and the options
you want.
2) Press the FAVOURITES button for
about 3
combination in the position M1. The
pre-existing saved programme in M1
will move in the position M2.
Start a program
memorized:
l
Press briefly the FAVOURITES button
(once for M1, twice for M2) and press the
START/PAUSE button.
l
Once you recall a memorized program,
you can still change its options and
settings, pressing
keys. In this case, the added options
won't be memorized.
If you accidently select a memorized
program, simply turn the program
knob to select another one.
15
favourite personalised
the programme and
FAVOURITES
M1 if this is
your finger on
seconds to save
that is
the corresponding
the
button,
the first
the
the
already