Predefined Schedules: Room Temperature + Leaving Water Temperature (Main) - Daikin Altherma User Reference Manual

To copy from one day to another
1 Select the day from which you want to copy and press
Example: Monday.
2 Select Copy day and press
3 Set the days you want to copy to Yes and press
Tuesday = Yes, Wednesday = Yes, Thursday = Yes and Friday
= Yes.
To save the schedule
1 Press , select Save schedule and press
2 Select User defined 1, User defined 2 or User defined 3 and
press .
3 Change the name and press
temperature schedules). Example: MyWeekSchedule
4.7.4 Predefined schedules: Room temperature
+ leaving water temperature (main)
: Desired temperature = Preset value (Comfort)
: Desired temperature = Preset value (Eco)
Predefined 1
Mon - Fri
07:00 09:00
Sat - Sun
08:00
Predefined 2
Mon - Fri
07:00 09:00
Sat - Sun
08:00
Predefined 3
Mon - Sun
08:00
4.7.5 Predefined schedules: Leaving water
temperature (additional)
: Additional zone = On
: Additional zone = OFF
Predefined 1
Mon - Fri
07:00 09:00
Sat - Sun
08:00
Predefined 2
Mon - Fri
07:00 09:00
Sat - Sun
08:00
Predefined 3
Mon - Sun
08:00
EGSQH10S18AA9W
Daikin Altherma ground source heat pump
4P351749-1D – 2016.09
.
. Example:
.
. (Only applicable for room
17:00 23:00
23:00
12:00 14:00 17:00 23:00
23:00
23:00
17:00 23:00
23:00
12:00 14:00 17:00 23:00
23:00
23:00
4.7.6 Predefined schedules: DHW tank
temperature
.
a
: Start production of domestic hot water. Desired DHW tank
temperature = Preset value (Storage comfort)
b
: Start production of domestic hot water. Desired DHW tank
temperature = Preset value (Storage eco)
Predefined 1
a
Mon - Sun
b
Predefined 2
a
Mon - Sun
b
Predefined 3
a
Mon - Fri
b
a
Sat - Sun
b
4.8 Weather dependent operation
In space heating control, the leaving water temperature setpoint
mode can be:
▪ Fixed
▪ Weather-dependent (the leaving water temperature is determined
automatically depending on the outdoor temperature)
To select the setpoint mode, see the installer reference guide.
To set the parameters for the weather-dependent curve, see below.
4.8.1 To set the weather dependent settings
Prerequisite: You switched the permission level to Advanced end
user.
1 Go to [7.7]: > User settings > Set weather dependent.
2 For main leaving water temperature zone [7.7.1], modify with
, , , , and confirm with
3 If applicable, for additional leaving water temperature zone
[7.7.2], modify with
Set weather-dependent heating
T t
c
d
a
T Target leaving water temperature
t
T Outdoor temperature
a
a Low outdoor ambient temperature
b High outdoor ambient temperature
4 Operation
:00
:00 :00
:00
:00 :00
.
, , , , and confirm with
b
T a
User reference guide
.
17