Charging The Battery - HTC Snap User Manual

28 Getting Started
To install the battery
1.
Remove the back cover.
2.
Align the battery contacts with the
connectors at the upper part of the
battery compartment.
3.
Insert the contacts side of the battery
first and then gently push the battery
into place.
4. Replace the back cover.
To remove the battery
1.
Make sure your phone is turned off.
2. Remove the back cover.
3.
The lower part of the battery compartment has a groove. Lift the battery from
the groove to remove it.

1.3 Charging the Battery

New batteries are shipped partially charged. Before you start using your phone, it is
recommended that you install and charge the battery. Some batteries perform best
after several full charge/discharge cycles.
Note
Only the AC adapter and USB sync cable provided with your device must be used to
charge the device.
Charging is indicated by a solid amber light on the Notification LED. As the battery
is being charged while the device is on, a charging icon (
title bar of the Home screen. After the battery has been fully charged, a full battery
icon ( ) appears in the title bar of the Home screen.
Groove
) also appears in the